Sonic Hueforge - Shadow

Project: Shadow.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 235x235mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.5mm and the Actual Depth is 2.6mm Filaments Used: PLA Black Transmission Distance: 0.6 PLA White Transmission Distance: 5 PLA Red Transmission Distance: 4 PLA Yellow Transmission Distance: 5.5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to White At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Yellow At layer #17 (1.44mm) swap to White At layer #19 (1.6mm) swap to Yellow At layer #21 (1.76mm) swap to Red At layer #22 (1.84mm) swap to White for the rest.