Sonic the Hedgehog Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x239.98mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.8mmFilaments Used: PLA ELE GOO Black Transmission Distance: 0.2 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Cyan Transmission Distance: 8 PLA ELE GOO White Transmission Distance: 5.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #4 (0.4mm) swap to Blue At layer #8 (0.72mm) swap to Cyan At layer #15 (1.28mm) swap to White for the rest. This can be easily resized in your slicer, although make sure that you do not change the value of “Z” dimension. The frame was made by user dohara1985 and can be downloaded from their page. I simply printed it in blueBoost MeI don't want to be a beggar, but boosts will help me to determine what models folks enjoy so that I know to create more similar.