Thingiverse
Sonicare wall holder
by wodor666
2
Downloads
3
Likes
0
Makes
Easy and quick to print Sonicare toothbrush holder, to be installed on the wall.
This one works also with diamondclean toothbrush type that doesn't have this neat groove at the bottom.
Print the parts separately and glue them together.
It will work best if you minimise elephant foot as the assembly parts orientation is different than print orientation - this allows to avoid load in the weakest direction.
You have to design your own part between the wall and provide a round plate of 42mm diameter to glue on. This is very easy to do, in any cad-like app, just create a tube with 42mm outer diameter, 3-4 mm thick walls and the botttom with a hole that will handle a screw.
In my case it was 1/2'' square valve handle, that was sticking off the wall and decided to hide with something practical.
This one works also with diamondclean toothbrush type that doesn't have this neat groove at the bottom.
Print the parts separately and glue them together.
It will work best if you minimise elephant foot as the assembly parts orientation is different than print orientation - this allows to avoid load in the weakest direction.
You have to design your own part between the wall and provide a round plate of 42mm diameter to glue on. This is very easy to do, in any cad-like app, just create a tube with 42mm outer diameter, 3-4 mm thick walls and the botttom with a hole that will handle a screw.
In my case it was 1/2'' square valve handle, that was sticking off the wall and decided to hide with something practical.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
