Thingiverse
Sonicmodell Binary Gimbal (Mini 3D Pro) adapter
door AndiArbeit90
4
Downloads
4
Likes
0
Makes
This design has not been fully tested yet!
The baseplate is used to mount a Feiyou-Tech Mini 3D Pro Gimbal to the Sonicmodell Binary. It offers mounting provisions for a Micro FPV Camera up front, mounted via a metal bracket that usually comes with these types of cameras. The Baseplate slots into the pre-cut rectangular holes and is screwed down using two M3 screws. I took the M3 nuts that have been installed by the factory for the main landing gear, since I won't use it. Mark the holes by attaching the Baseplate, drill two 3.5 mm holes and install the nuts. As simple as that. ;)
The hole in the Baseplate may be used to pass the cables through for clean wiring.
Note: The photo shows an earlier version without the micro FPV camera mounting provision.
The baseplate is used to mount a Feiyou-Tech Mini 3D Pro Gimbal to the Sonicmodell Binary. It offers mounting provisions for a Micro FPV Camera up front, mounted via a metal bracket that usually comes with these types of cameras. The Baseplate slots into the pre-cut rectangular holes and is screwed down using two M3 screws. I took the M3 nuts that have been installed by the factory for the main landing gear, since I won't use it. Mark the holes by attaching the Baseplate, drill two 3.5 mm holes and install the nuts. As simple as that. ;)
The hole in the Baseplate may be used to pass the cables through for clean wiring.
Note: The photo shows an earlier version without the micro FPV camera mounting provision.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!