Sonoff minir4 mount

My little mount for the Sonoff minir4 wifi relay switch.

Not to be confused with a minir2, or any other mini. I think they are different sizes. This project was made for a minir4.

I designed a base unit for the minir4. A holder.
And a cover for the base unit.
And a din rail mount.

You can screw the base unit to the din rail mount to mount the minir4 on to a 35mm din rail. Use a flat head 4mm screw.

I didn’t have the right size flat head screw so I used 2 pieces of vhb double sided tape to stick the 2 parts together. You could probably glue them together also, whatever works. 2 big flat areas that need to mate together somehow. Screw or tape or glue.

The din rail mounts pretty tight to the din rail. I could not get it to snap on over the top. I had to slide it in from the side. Kind of a PITA but at least it will never come off by itself.

You can print just the mount itself to hold a minir4. If it’s going to be in a dirty environment then you can print the cover for it. If y