Slicer Discord
Sony E-Mount Macro Extension Tube – 3D printable model from MakerWorld MakerWorld
Other Tools

Sony E-Mount Macro Extension Tube

413 Downloads
80 Likes
252 Makes
Go to Model
15mm macro extension tube for Sony E-Mount cameras. The extension tube goes between the camera lens mount and your lens and makes your lenses as macro lenses. By moving the lens forward it will reduce the minimum focus distance to the point where you can use pretty much any lens as a macro lens. This doesn't support autofocus, so you'll have to focus by moving your camera backwards or forwards until the subject is in focus. You'll also need to make sure your lens aperture at the max before you attach the lens to the adapter as you won't be able to change it.Sample pictures are taken of an old AMD Phenom II with a Sony A6000 and the Sony 16-55mm kit lens, which has a minimum focus distance of about 25cm. With this adapter it is close to 5mm at its widest focal length. This needs supports, and print it with 4 perimiters and about 15-20% infill. To avoid light leaking into the adapter print it in black, but I printed mine in white and I have had no issues
Category
Other Tools
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection