Slicer Discord
SOVOL SV01 E3D Hemera Mount. – 3D printable model from MakerWorld MakerWorld
3D Printer Parts

SOVOL SV01 E3D Hemera Mount.

1 Downloads
0 Likes
0 Makes
Go to Model
This is the combo I use for the E3D Hemera extruder on the SOVOL SV01. I still have some upgrades to do : Filament sensor mount Cable holder on the X motor mount cover. /!\ This combo includes Tarasque1024's Hemera_5015_Fan_Mount_45deg_V4.stl https://www.thingiverse.com/thing:4039235 which works perfectly. /!\ This combo includes my X Motor Cover from my SOVOL SV01 Savior's Kit. https://www.thingiverse.com/thing:4730352 which allows to maximize X travel to +300mm The design try to minimize the amount of work on the genuine carriage: it mostly uses the holes already drilled into SOVOL's blue carriage. There's only one hole to drill (M3). As I tried to save the same Z-height and same Firmware configuration*, and minimize the holes to be drilled, you'll have to dismount the carriage to fix the hemera from the back of the carriage. Firmware changes : X travel 300mm Esteps 376mm (eventually to be adjusted) Recommended material : PLA (for Motor and cable cover) PETG/ASA/A
Category
3D Printer Parts
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, PETG, ASA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection