Thingiverse
Sovol SV07 Cable Management
door Ethan116
3
Downloads
7
Likes
0
Makes
Cable management channels for Sovol SV07 the z-axis and extruder.
The cable management on the Sovol sv07 I got is very hard to deal with. More than once the massive taped-together cable has gotten stuck in the y-axis.
To deal with this I recommend using an xacto knife to un-bind the z-axis cable and the parts fan cable from the bundle to give them more slack, and to install these channels with some zip ties.
When installing the z-axis channel be sure not to tighten down the cable too much. It still needs to be able to move with the z-axis.
The cable management on the Sovol sv07 I got is very hard to deal with. More than once the massive taped-together cable has gotten stuck in the y-axis.
To deal with this I recommend using an xacto knife to un-bind the z-axis cable and the parts fan cable from the bundle to give them more slack, and to install these channels with some zip ties.
When installing the z-axis channel be sure not to tighten down the cable too much. It still needs to be able to move with the z-axis.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
