Sovol SV08 Control Panel

This control panel houses the Big Tree Tech 5" LCD Screen V1.2 and two 22 [mm] diameter latching push buttons: one for power and one for lights. The lights are LED strips mounted onto four 'led_strip_mount_sv08' parts, which are mounted onto the aluminum side panels using double sided-gorilla tape. The LED strips take 12V power supply, and draw around 2.5 Amps. A 12V, 5 Amp power supply is attached to the underside of the printer within the electronics bay: it powers the lights and push buttons, and mounts onto the 'power_supply_mount_12V_5A_sv08' part using M3 bolts. The power supply mount itself is attached within the electronics bay using double-sided gorilla tape. To print the control panel mount, use support enforcers in the void between the screen mount and the print bed. A 30% infill with 0.15mm resolution is sufficient.

####Materials

####Steps

TO DO:
1. Upload circuit diagram
2. upload pictures of build steps
3. list the materials and purchase links
4. list the build steps