Slicer Discord
Soyuz-2.1a – Modèle 3D imprimable de MakerWorld MakerWorld
Sculptures

Soyuz-2.1a

125 Téléchargements
62 Likes
28 Makes
Voir le modèle
DescriptionThe 1:159 scale model of the “Soyuz-2 Stage 1a” launch vehicle with the “Soyuz-MS” manned spacecraft consists of 24 parts. The height of the finished model is 320 mm. RecommendationsYou can scale the model. However, if reduced, there is a risk that some small elements will not be printed. I have not tried to print this smaller model, so I would appreciate it if you would share your experience.The print profile has quite specific parameters, but specifically in my case it works fine:The printing time with a 0.4mm nozzle is approximately 11 hours;The printing time with a 0.2mm nozzle with a layer height of 0.06mm will be approximately 25 hours. The components of the rocket are specially divided into several parts to minimize the time spent on eliminating possible defects. However, if necessary, you can change the model. To do this, I have attached a .blend file with a rocket model.The finished parts must be glued together. The first-stage engines will probably hold up well wit
Catégorie
Sculptures
Source
MakerWorld
Publié
Mis à jour
Ce qu'il faut pour imprimer: Avancé Confiance moyenne
Pourquoi ?
assemblage en 24 parties
24 pièces à assembler
Supports 1/3
Assemblage 3/3
Réglages 1/3
Taille du plateau 0/3
Post-traitement 1/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
Temps estimé
11 h
Post-traitement
Collage
Logiciel
Cura, PrusaSlicer ou similaire
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection