space bookmark v3

Project: space bookmark v3 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 31.72x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm WARNING : if you want to resize it please resize only the x and y axes and not the Z axe ! Filaments Used: but you use all filament you have PLA Kingroon Black Transmission Distance: 0.4 PLA Kingroon Red Transmission Distance: 4.2 PLA Kingroon Orange Transmission Distance: 4.6 PLA Kingroon White Transmission Distance: 4.7 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #19 (1.6mm) swap to White for the rest. To purchase a commercial license and sell my creations, access to my KO-FI SPACE Alternatively, make a small donation here ko-fi https://ko-fi.com/ziakat