Space Cat Hueforge

Astronaut cat in space created in Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 136.84x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 7This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Brown At layer #13 (1.12mm) swap to Jade White At layer #16 (1.36mm) swap to Orange for the rest.