Space Saving Pistol Rack

Simple pistol rack designed to maximize space inside your safe. Rack is customizable to fit the width of your pistol, and thus save space. To complete this project, you will need:

- print at least one pistol_rack_body.stl. be sure to resize this part to fit the width of your pistol. print beveled edge facing down on build plate.

- print at least 2 pistol_rack_divider.stl. print beveled edge facing down on build plate. divider is 1/16in thick. you might want to change it to 1/8in in your slicer to increase the rigidity. or use whatever material is handy. I used 1/8in thick hardboard in my final product.

- 1/4in-20 threaded rod. I recommend buying a 3ft length at Home Depot for around $2.50. (https://www.homedepot.com/p/1-4-in-20-tpi-x-36-in-Zinc-Plated-Threaded-Rod-802217/204274011)

- 6 x 1/4-20 nuts

Important notes on printing:

pistol_rack_body.stl is 1.3in wide. This is the minimum recommended width. You need to measure the width of your pistols, and re-size the bo