Spacecatmarine

Project: SpaceMarineCatV2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Sunlu Purple Transmission Distance: 6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Blue At layer #7 (0.64mm) swap to Blue Gray At layer #10 (0.88mm) swap to Purple At layer #13 (1.12mm) swap to Ivory White for the rest. I wasn't going for a lithopane, but when held to the light, it sure looks like it would work as one.