Spaceman

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 112x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.77208mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #00007f PLA Generic blue Transmission Distance: 7 #55aaff PLA Generic sky blue Transmission Distance: 5 #ae272b PLA Generic red Transmission Distance: 6.4 #ff5500 PLA Generic orange Transmission Distance: 7.2 #ffff00 PLA Generic yellow Transmission Distance: 7.2 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #12 (0.6mm) swap to blue At layer #15 (0.72mm) swap to sky blue At layer #20 (0.92mm) swap to red At layer #25 (1.12mm) swap to orange At layer #30 (1.32mm) swap to yellow At layer #36 (1.56mm) swap to White for the rest. Boost Me