MakerWorld

Characters

Spaceman

by CHiTO316 · Characters

1 Downloads

1 Likes

0 Makes

Spaceman made with a round face of around 1.75" in size. -76x49x100mm in size-Needs support-Print in less than 3 hours Powered by MakerWorld-Image-to-3D (https://makerworld.com/makerlab/imageTo3d)

spaceman toy singlecolor A1 A1 Mini NASA space astronaut

Category

Characters

Source

MakerWorld

Published

19.01.2026

Updated

28.03.2026

What you need to print this: Beginner Medium confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

100 mm (Medium)

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Spaceman?

Any FDM printer should handle Spaceman just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 100 mm is recommended.

How long does it take to print Spaceman?

According to the design notes, Spaceman takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Spaceman available in?

Spaceman is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Spaceman free to download?

Yes, Spaceman is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Spaceman

Similar Models

Add to Collection