Slicer Discord
Spaceonefpv 220X Pod – 3D-Druckmodell von Thingiverse Thingiverse
Spaceonefpv 220X Pod – Bild 1 Spaceonefpv 220X Pod – Bild 2 Spaceonefpv 220X Pod – Bild 3 Spaceonefpv 220X Pod – Bild 4 Spaceonefpv 220X Pod – Bild 5 Spaceonefpv 220X Pod – Bild 6
Hobby

Spaceonefpv 220X Pod

von babar121 · Hobby
371 Downloads
330 Likes
28 Makes
Zum Modell
****Update. New Models added.
Short Camera= flight camera position to outside of pod is shorter.
Gopro Normal Camera=Original flight camera position with gopro mount
Gopro Short Camera=flight camera position to outside of pod is shorter with gopro mount.



This is an aero pod for the Spaceonefpv220x frame. It replaces the stock upper frame deck and standoffs. It is modeled for use with the hs1177 camera. With 30,40, and 50 degree camera positions. Pod is Intended for use with 2.1 camera lens. It uses 4x1/2" pan head sheet metal screws you can find at your local home store i.e. Lowes ,Home depot etc. to attach to the stock frame.
Kategorie
Hobby
Quelle
Thingiverse
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, TPU
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen