SpaceX Helmet

Update: Adafruit has featured my design! See here for assembly instructions and adding LEDs and motion sensors:

https://learn.adafruit.com/spacex-helmet/

Opening SpaceX Helmet Replica. It is a work in progress, but as of this point you can print a functioning helmet! Well, 'functioning' meaning it opens, don't try to go to space with it. And don't use it for protection.

You will need a fairly large bed, the largest part of the assembly is 240mm x 209mm. Parts can be glued together or bolted together with inserts and screws.

####Inserts and screws (about $20 worth):

* M3 x 0.50 mm Brass Inserts: https://www.mcmaster.com/94459a130

* 18-8 Stainless Steel Hex Drive Flat Head Screw, M3 x 0.5 mm Thread, 5 mm Long: https://www.mcmaster.com/92125a125

* 18-8 Stainless Steel Hex Drive Flat Head Screw, M3 x 0.5 mm Thread, 8 mm Long:
https://www.mcmaster.com/92125a128

* 18-8 Stainless Steel Hex Drive Flat Head Screw, M3 x 0.5 mm Thread, 12 mm Long: https://www.mcmaster.com/92125a132