Thingiverse
Fashion
Model downloaden
SpaceX Key Fob
284
Downloads
308
Likes
6
Makes
Created for SpaceX fans... a simple key fob using the logo styling to form the outline shape of the key fob. They look great printed in 2 or 3 colors. Just pause your machine at the relevant times mid-print and swap the filament color.
To make the SpaceX Key Fob multi colour (based on standard scale use) please use the following as a guide:
spacex_2.stl
This is the 2 colour version. The base is 2.85mm tall so swap your filament at 3mm through the print (if you can pause by mm build height) and change the filament colour. If you cannot pause in this way you will need to pause the machine manually. In this case watch the print and, when you can see the base surface is fully covered and the machine starts only printing the lettering manually pause your machine, swap the filament then restart to complete the print.
spacex_3.stl
First pause as above. The second change is just 1mm build height later (3.85mm) which will not take long at all because to reach as the lettering is all
To make the SpaceX Key Fob multi colour (based on standard scale use) please use the following as a guide:
spacex_2.stl
This is the 2 colour version. The base is 2.85mm tall so swap your filament at 3mm through the print (if you can pause by mm build height) and change the filament colour. If you cannot pause in this way you will need to pause the machine manually. In this case watch the print and, when you can see the base surface is fully covered and the machine starts only printing the lettering manually pause your machine, swap the filament then restart to complete the print.
spacex_3.stl
First pause as above. The second change is just 1mm build height later (3.85mm) which will not take long at all because to reach as the lettering is all
muzz64 publiceert ook op
4 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
