MakerWorld
Electronics
Go to Model
Sparkle Motion Mini Plate Adapter
0
Downloads
0
Likes
0
Makes
This is an adapter plate for an Adafruit Sparkle Motion Mini board (https://www.adafruit.com/product/6160 ) that lets it be mounted in places intended for the full-sized Adafruit Sparkle Motion controller. I made this to mount the Sparkle Motion Mini on the frame of this 16x16 Neopixel panel project https://learn.adafruit.com/16x16-neopixel-matrix-square-pixel-display The Sparkle Motion Mini mounts to the adapter with M2.5 screws, and the adapter mounts to the LED frame with M3 screws. I used metal screws and they threaded enough into the plastic to not need a backing nut. The adapter has a cutout so the parts on the underside of the PCB aren't in contact with plastic. The project also includes a terrible, terrible diffuser panel if you don't have a piece of the cool plexiglas for the front. I recommend using the plexiglas front beacuse it looks much better, but you do you, pikachu.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!