Speaker Box

A small desktop speaker enclosure for 2" drivers like those from the Logitech Z313 speaker system.

### Printing

Orientation is already optimized for printing, leave as-is for best results. The body should have the solid bottom facing down and the open side facing up, and the lid should have the flat side down. Supports should not be necessary if you have adequate part cooling performance. For best sounding results, print with at least 50% infill.

### Assembly

Mounting holes were adjusted to reuse hardware from the Logitech Z313 system, so the speakers should be secured with M3 screws and the lid should be secured with M2.5 screws. If you find the fit is too tight, adjust the horizontal expansion settings in your slicer.