Thingiverse
Speaker Box
por Nichsen
17
Descargas
11
Likes
0
Makes
# My new Surround Speaker
- Print Things Upside down !
- Use a primer before real paint layer
- I used threaded bushes/fusible nuts
- Use wood or other material for the sides in 10x15 cm
- The speaker itself is: "Lavoce FAN030.71" it's a 3" fullrange speaker at 8 Ohm
- I used some jacks with screw and plug connection
- There is an additional fiel to cover the speaker front and screws
- The rear part has got some holes to screw it anywhere ;-)
The original Fusion360 file is attached if you want to customize my design.
Pleas feel free to give me your questions and feedback ;-)
If you really like my design, feel free to support me on Ko-fi: https://ko-fi.com/nichsen 😊
- Print Things Upside down !
- Use a primer before real paint layer
- I used threaded bushes/fusible nuts
- Use wood or other material for the sides in 10x15 cm
- The speaker itself is: "Lavoce FAN030.71" it's a 3" fullrange speaker at 8 Ohm
- I used some jacks with screw and plug connection
- There is an additional fiel to cover the speaker front and screws
- The rear part has got some holes to screw it anywhere ;-)
The original Fusion360 file is attached if you want to customize my design.
Pleas feel free to give me your questions and feedback ;-)
If you really like my design, feel free to support me on Ko-fi: https://ko-fi.com/nichsen 😊
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
