Thingiverse
Speaker Grid with Name
por drgrandios
40
Descargas
44
Likes
0
Makes
A speaker grid for the boom boxes of my two daughters (see https://www.thingiverse.com/thing:3318852 for the build).
The default diameter of the M3 holes is set to 96mm - the grid itself should cover an 8 cm speaker without problems.
Use the m3test.stl to check if the generated M3 mount comes out correctly on your printer.
Note: OpenSCAD needs about 10 minutes to render the model (at least on my laptop)
Use the following values for a Visaton FRS-8 M (mounting holes are aligned with the speaker):
OUTER = 84;
N = 9;
DIA = 15;
WALL = 3;
BORDER_DIA = 12;
M3_HEAD_BOTTOM = 3;
M3_HEAD_DIA = 6.5;
M3_HOLE_DIA = 3.8;
A blank version of the speaker cover for a Visaton FRS8 M can be found in the files section.
The default diameter of the M3 holes is set to 96mm - the grid itself should cover an 8 cm speaker without problems.
Use the m3test.stl to check if the generated M3 mount comes out correctly on your printer.
Note: OpenSCAD needs about 10 minutes to render the model (at least on my laptop)
Use the following values for a Visaton FRS-8 M (mounting holes are aligned with the speaker):
OUTER = 84;
N = 9;
DIA = 15;
WALL = 3;
BORDER_DIA = 12;
M3_HEAD_BOTTOM = 3;
M3_HEAD_DIA = 6.5;
M3_HOLE_DIA = 3.8;
A blank version of the speaker cover for a Visaton FRS8 M can be found in the files section.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!