Cults3D
€ Paid
Gadget
Go to Model
Speaker stand - low poly version
0
Downloads
1
Likes
0
Makes
Low poly version of my organic speaker stand. Original model was slightly bigger. This one was was made to fit the Prusa Core One.
Of course you can use it to display all kinds of things in style. ;-)
Size can be scaled of course, depending on your printer and use case.
Model is 240 x 182x 197 mm overall, so make sure it fits your printer! Check your specific speaker size and scale if necessary.
Model in the pictures was scaled down a bit to save some filament. ;-)
I made two models:
A one piece model, so you can scale it to your needs. Removing supports can be a bit tricky here though.
Second model is divided in top and bottom part, so you can print them separately. 5.2 mm holes are for easier assembly with standard 5x24 mm metal bolts but you can also print bolts as connectors. Keep in mind that scaling of the two-part-model will also scale the connecter holes!
Removing supports is far easier with the two-part-version.
Post a make if you like! :-)
By downlo
Of course you can use it to display all kinds of things in style. ;-)
Size can be scaled of course, depending on your printer and use case.
Model is 240 x 182x 197 mm overall, so make sure it fits your printer! Check your specific speaker size and scale if necessary.
Model in the pictures was scaled down a bit to save some filament. ;-)
I made two models:
A one piece model, so you can scale it to your needs. Removing supports can be a bit tricky here though.
Second model is divided in top and bottom part, so you can print them separately. 5.2 mm holes are for easier assembly with standard 5x24 mm metal bolts but you can also print bolts as connectors. Keep in mind that scaling of the two-part-model will also scale the connecter holes!
Removing supports is far easier with the two-part-version.
Post a make if you like! :-)
By downlo
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
