Speaker Stand/Mount

Speaker Stand for small desk speakers or studio monitors. This model can be used free standing with it's base stand and plate, or you can use the add on mounting bracket to attach to a ¾" monitor shelf. This was designed around the BALOLO MONITOR STANDS and will fit perfectly. But you can also drill matching holes into any monitor shelf to use of course. IF USING THE MOUNTING BRACKET:M3x20 Self Tapping Screws - and yes you read that right, SELF TAPPING ON 3D PRINTED PLASTIC. Before I get comments they work very well when you plan for them in your print. Extra walls, precise measurements and plenty of testing.NOTE: They will break if you over tighten, so only tighten until they are snug. Should come just about flush if your printer is dialled inM5x12 is what Balolo uses for their mounting system, so use those if you have this setup. Otherwise, use any M5 sized screw that fits your shelf.Additional Notes:Used Bambu Labs PLA Basic - Black with 3 walls for a bit more strength. My A