Thingiverse
Speaker terminal / binding post
von iCONICA
5
Downloads
7
Likes
0
Makes
The holes in the original are 6.5mm (translated from Russian).
I needed smaller holes with flat sides. I've modified it with that change. The holes are now 5.25mm wide with flat spots at 4mm wide (see screenshot of dimensions).
For info, the hole you'll need to cut/holesaw is 48mm, the model is just short of that at about 47.9~mm
I needed smaller holes with flat sides. I've modified it with that change. The holes are now 5.25mm wide with flat spots at 4mm wide (see screenshot of dimensions).
For info, the hole you'll need to cut/holesaw is 48mm, the model is just short of that at about 47.9~mm
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!