Thingiverse

Speedlight Umbrella Holder

von mt61286

50 Downloads

26 Likes

0 Makes

I needed something to hold my speedlights and diffuser umbrellas to my tripods, and I didn't like that most things had the flash so far off center from the diffuser umbrella. I had two different kinds of quick releases for two tripods. These mount directly to the quick release mechanism. The speedlights are strapped to the top, and there's a 9mm hole for the umbrellas directly beneath. I have two 12" straps that I use. zip ties or Velcro straps would work as well. There is a 3mm hole for a set screw. I just used whatever I had in a drawer.

ball head camera Light Diffuser photography speedlight tripod tripod mount ball head camera Light Diffuser photography speedlight tripod tripod mount

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Speedlight Umbrella Holder

Zur Sammlung hinzufügen