Speedy Seedy

Hand crank used to move a bird feeder into an easy position for refilling and cleaning. Requires four M3x25mm socket-cap screws for assembly - or just two if you want to use superglue to attach the downspout adapter to the downspout clamp. Once assembled use zip-ties to connect it to a 2x3" downspout channel and feed 550 (4mm) paracord around the crank.

If the paracord slips on the crank you can further rough up the surface using a dremel or hacksaw blade.

Recommended print settings:
- 0.2mm layer height
- 4 perimeters
- 7 top/bottom layers
- Supports required for mount.stl, the remaining parts print fine without supports