Sphinx CNC fixtures collection.

I've been making one of Kyo's Sphinx CNC routers for myself (https://www.thingiverse.com/thing:1741813), and I thought I'd share some of the files I've made to assist with mounting and setup for anyone else who's doing the same thing.

Rear PSU Mounting:
The Meanwell LRS-350-24 PSU is a great fit for this build. I've included "PSU Support" for the rear mount. I've used some M4 x 8mm countersunk machine screws to mount to the PSU, and some M5 x 20mm machine screws for the mount to the board (the image shows M5 x 25mm with a spacer).

Front PSU Mounting:
I've gone with this thing:https://www.thingiverse.com/thing:2440784 which was pretty close. Again I've used M4 x 8mm countersunk machine screws into the PSU, and I've added a little block to the side (see below) for a more secure mount. And an additional block on top to help secure the power connector (see also below). That's secured with M5 x 25mm machine screws.

PSU Front Mount Block:
I've used this to secure the front of th