Spice carry/holder

This is one of my first 3D moddeling projectsInspired by my Mothers wooden spice carryDesigned for 0.4mm nozzle and might not fit if printed with anything largerpieces needed2x Sidepiece 1x Tophandle 1x Bottompiece 2x Sidecoverfor less postprocessing print Tophandle on one of the ends with a brimBottompiece recomended to print on Textured build plate with texture up when assembledSide piece can be printed on 3D effect build plates for interesting effect Assembly instructions:Place Sidepiece on table and press Tophandle and Bottompiece into their slots and holes.Line up and push the second Sidepiece onto top of Tophandle and Bottompiece.Press both sides until flush, if they wont go flush try using a deburring tool, file or sandpaper on sharp corners.Put Sidecover on one side and bend slightly to get it into the slit in the Sidepiece, repeat for other side.