Spider bookmark

Model size is 50x150mm, you can scale the size, but when changing dimensions, you must not change the height (Z). Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used:PLA Elegoo + Black Transmission Distance: 0.3PLA Elegoo + White Transmission Distance: 6PLA Elegoo + Red Transmission Distance: 3.7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to WhiteAt layer #11 (0.96mm) swap to BlackAt layer #15 (1.28mm) swap to RedAt layer #19 (1.6mm) swap to White for the rest.