Spider-Man 2099

Miguel O'Hara - Spider-man 2099 Model is Split into the separate colored layers There are multiple color swaps required if you only have a single AMS system. You can swap out colors when they are no longer used while the print is going or add pauses to the gcode to swap the filament. Slice with Classic instead of Arachne because Arachne takes a very very long time. If printing on X1C, disable purge tower and Automatic Flow Calibration to make sure there is enough room on the bed.Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmFilaments Used:PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA Inland Matte Blue Transmission Distance: 2PLA Inland Matte White Transmission Distance: 4PLA PolyTerra Charcoal Black Transmission Distance: 0.3PLA Inland Matte Red Transmission Distance: 3PLA Inland Matte Yellow Transmission Distance: 5PLA PolyLite White Transmission Distance: 5Swap Instructions:Start with Charcoal BlackAt layer #9 (0.48mm) swap to BlueAt layer