Spider Man Comic Hueforge

Bring a piece of comic book history to life with this HueForge recreation of Amazing Fantasy #15 — the iconic first appearance of Spider-Man. This Hueforge prints easiest with an AMS, but could be printed without one if you are okay with pausing and manually swapping the filament. I used Sunlu for most of the colors, however, I swapped the red and the silver for silk filamanets just for personal preference. I included two versions; one is slightly larger than the original. Swapping details below - the swapping details are the same for both sizes. Print at 100% infill with a layer height of 0.12mm with a base layer of 0.32mm The Model is 149.65x230mm in size You may print at higher layer heights below the Base Thickness of 0.68mm The Max allowed Thickness is 3.56mm and the Actual Thickness is 3.32mm #000000 PLA+ Sunlu Black Transmission Distance: 0.6 #d22332 PLA+ Sunlu Red Transmission Distance: 6 #00f52c PLA+ Sunlu Green Transmission Distance: 10 #01b3ff PLA+ Sunlu Sky Blue Transmissio