MakerWorld
Hueforge & Lithophane
Voir le modèle
Spider-Man Hueforge
108
Téléchargements
67
Likes
50
Makes
Project: SpiderMan.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Matte Marine Blue Transmission Distance: 0PLA BambuLab Matte Jeans Red Transmission Distance: 0PLA BambuLab Basic White Transmission Distance: 6This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!! Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Marine BlueAt layer #12 (1.04mm) swap to Jeans RedAt layer #16 (1.36mm) swap to White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
