Spider Web Shelf Support Bracket

Here's a shelf bracket that I made to look like a spider's web. It's perfect for all those that believe Halloween should last all year, or fans of spiders, or fans of Spiderman. It measures 130mm deep and 130mm tall. It's a good size for a shelf that's about six inches in depth. To install these you'll need three different types of screws. You'll need number 8 wood screws that are 1 ¼ or 1 ½ inches long for the bottom of the bracket. Black drywall screws work well if you print the bracket in black filament. You'll need number 6 wood screws that are about the same length as the thickness of your shelf board to attach the bracket to the shelf board. You'll also need a 2 inch pan head screw to go into the pocket on the top of the bracket. Pocket hole screws are ideal for this if you have them since they have a predrilling point. I recommend you run the screws into wall studs. Start with the bottom screws, then do the pocket hole screws on the top. There