Spiderman Bookmark HueForge

I’m new to 3D modeling and still learning. If you find any problems or have ideas on how to improve the design, please let me know. Feedback is always welcome! This model was my early work so the model is Thick Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.33x200mm in sizeYou may print at higher layer heights below the Base Thickness of 1.52mmThe Max allowed Thickness is 3.28mm and the Actual Thickness is 3.2mm #000000 PLA Paramount 3D Black Transmission Distance: 4 #ffffff PLA Sunlu Matte White Transmission Distance: 5 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #e11021 PLA Copymaster 3D TURBO Red Transmission Distance: 4.1This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #5 (0.48mm) swap to White At layer #20 (1.68mm) swap to Blue At layer #29 (2.4mm) swap to Black At layer #34 (2.8mm) swap to Red for the rest. Setting Layer height: 0.08Initial Layer height: 0.16Wall: 2Sparse infill density: 10