SPIDERMAN COLORED (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0 PLA+ Sunlu Red Transmission Distance: 3.6 PLA+ Sunlu Blue Transmission Distance: 0 PLA+ Sunlu White Transmission Distance: 2.5 Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #15 (1.28mm) swap to Blue At layer #16 (1.36mm) swap to White for the rest.