Spiderman Hueforge

Project: spiderman.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 143x213mm in sizeYou may print at higher layer heights below the Base Thickness of 0.32mmThe Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #d73737 PLA Kingroon Red Transmission Distance: 4.2 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with PolyLite Black At layer #4 (0.4mm) swap to BambuLab Basic Blue Gray At layer #11 (0.96mm) swap to Kingroon Red At layer #18 (1.52mm) swap to PolyLite White for the rest.