Spiderman Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z. The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Black Transmission Distance: 1PLA BambuLab Basic Blue/Gray Transmission Distance: 3PLA Sunlu Red Transmission Distance: 4PLA Sunlu White Transmission Distance: 3.5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue/GrayAt layer #10 (0.88mm) swap to RedAt layer #20 (1.68mm) swap to White for the rest.