SpiderMan HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 118.52x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA AzureFilm Black PLA AzureFilm WhiteThis print uses 2 unique filaments but you can use any maker filaments as long as it is black and white Swap Instructions: Start with Black At layer #8 (0.72mm) swap to White for the rest.