Spiderman Lightning Hueforge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Jade White for the rest.