SPIDERMAN SELFIE HUEFORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #19 (1.6mm) swap to Jade White for the rest. IGNORE FLOATING REGION WARNING IF IT POPULATES.