MakerWorld
Hueforge & Lithophane
Vai al Modello
Spiderman spiders
17
Download
37
Likes
6
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kingroon Red Transmission Distance: 4.2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #15 (1.28mm) swap to Blue Gray At layer #21 (1.76mm) swap to White for the rest.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
