MakerWorld

Other Props & Cosplays

Spiked Chain

by NekidPopaMakin · Other Props & Cosplays

22 Downloads

41 Likes

4 Makes

A five link spiked chain. Can be linked together or connected to something using Chain End stl provided. 20% infillFull supports required.

spiked chain caution cosplay add on moving parts

Category

Other Props & Cosplays

Source

MakerWorld

Published

23.02.2024

Updated

30.04.2026

What you need to print this: Advanced Medium confidence

Why?

supports needed · very large print

Single piece Supports required May need scaling or splitting

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

300 mm (Extra large)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Spiked Chain?

Any FDM printer should handle Spiked Chain just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does Spiked Chain need supports when printing?

Yes, Spiked Chain will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Spiked Chain available in?

Spiked Chain is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Spiked Chain free to download?

Yes, Spiked Chain is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

1 Suggestions

Spiked Chain

Similar Models

Add to Collection