Spill Safe Oil Container

This is an oil brush container used for applying cutting oil to metal cutting tools such as drills, milling cutters, punch tools, broaches, ect. If filled to the internal line, the container will not spill even if turned upside down. There is a cavity on the bottom to snuggly fit a 25x3mm rare earth magnet. If you don't want to use this, leave the support material in place. The container threads together which allows it to be taken apart and cleaned as required. The brushes that I based it around have a stem diameter of about 8.5mm. You really don't need to use the stem stopper part or the stem cap. Modify as required if you want to use these parts with different diameter brush stems. Make sure that whatever you print this out of can withstand the cutting fluid that it will be holding. Rapid tap had no effect on PETG or PLA. Anchorlube is water based and also had no effect on either material.