Spin The Shot - drinking game

I've stumbled upon this interesting party game
(https://www.ebay.com/itm/Spin-the-Shot-Drinking-Game-Roulette-Glass-Spinning-Fun-Party-Home-/272950401467?_trksid=p2349526.m4383.l4275.c10)

and decided to design my own that would be easy to assemble with parts I had laying around.

Assembly:
1. fit a 608 bearing into the spinner.stl part - bearing dimensions at (https://www.mcmaster.com/#5972k91/=1aiv8gi)

2. put in an M8 35mm long screw through the bottom_piece.stl - screw dimensions at
(https://www.mcmaster.com/#91287a155/=1aiwg5s)

3.put on the spiner.stl+bearing on the screw

4. put the top_piece.stl on top so that the narrower end points upwords

5. fasten with an M8 Locknut - nut dimensions at
(https://www.mcmaster.com/#93625a300/=1aiwqek)