spindle fan mount
par 3bprints
2
Téléchargements
2
Likes
0
Makes
This is a fan mount for your average Chinese 500w spindle that drops a fan right in front too help cool the bottom portion of the spindle. idk how effective this as i haven't ran the machine for a long period yet with this but in the past i found the heat on the part of the spindle below the spindle mount would be a bit hot and so i would makeshift a fan holder to position a fan on that portion and well i finally had time to make a legit one. and even tho this spindle is cheap the last thing i need is for some stupid shit caused by heat to happen to it. in hindsight this may also help to clear debris away from the cut. with a higher powered fan it may be pretty effective for chip clearance.
anyways details about the piece are its printed in two separate pieces and connected together should be pretty obvious when printed and there is a hole to put a screw about m2 or m3 sized that hold the peices together or just glue..
fan diameter is for an 80mm sizefan
happy printing
anyways details about the piece are its printed in two separate pieces and connected together should be pretty obvious when printed and there is a hole to put a screw about m2 or m3 sized that hold the peices together or just glue..
fan diameter is for an 80mm sizefan
happy printing
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
