Thingiverse

Spine Coat Hanger Hooks

by HonestAbe

137 Downloads

97 Likes

0 Makes

Go to Model

Printed with support, 15% infill, took me 5 hours to print.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Spine Coat Hanger Hooks need supports when printing?

Yes, Spine Coat Hanger Hooks will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Spine Coat Hanger Hooks?

According to the design notes, Spine Coat Hanger Hooks takes approximately 5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Spine Coat Hanger Hooks available in?

Spine Coat Hanger Hooks is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Spine Coat Hanger Hooks free to download?

Yes, Spine Coat Hanger Hooks is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Spine Coat Hanger Hooks

Add to Collection