Thingiverse

Spinner 38mm

by FLesch

12 Downloads

5 Likes

0 Makes

Hardware: nozzle diameter 0,4mm
Software: nozzle diameter 0,8mm
Layer Height: 0,25mm
The spinner needs 2mm massive-print and the rest must be a spiral vase. Use cooling.
The plates need massive-print with 100% infill.

Cut out the hole for the prop with an soldering iron.
It is designed for PT 3x6 screws with torx.

There are two versions for each part. I hope one will fit for you.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

no supports · large print

Support-free Single piece Hardware needed

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

200 mm (Large)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Spinner 38mm?

Any FDM printer should handle Spinner 38mm just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Spinner 38mm need supports when printing?

No supports needed for Spinner 38mm — it's designed to print clean off the bed.

What file format is Spinner 38mm available in?

Spinner 38mm is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Spinner 38mm free to download?

Yes, Spinner 38mm is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Spinner 38mm

Add to Collection