spiral optical art

another optical spiral image to play with your sences , the hue forge was created from an image then sliced to enable you to print a painted image with your 3d printer , these models are really cool to watch the image come to life with each colour change making the image stand out , so don't be put off if it looks rubbish to beginwith , let it finish quite often its not till the last few layers that they start to come together Project:spiral art jpgPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150mm x90mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.32mm and the Actual Depth is 2.32mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray A